JVC KW-AVX830 User Manual

45
ENGLISH
Menu item Selectable setting/item
Initial: Underlined
Settings
Ring Mode

In Unit

In Phone
: Selects the ring tone set on the unit.
: Selects the ring tone set on the mobile phone. (This
function may not work depending on the mobile
phone.)
Ring Tone Change When <Ring Mode> is set to <In Unit>, you can sel
ec t the ring tone for
received calls and Tex t message from Tone1, Tone2, Tone3.

Call Tone

Message Tone
: Selects the ring tone for phone calls.
: Selects the ring tone for Text message.
Initialize Hold [Enter] to initialize all settings you have made in <Bluetooth>
menu.
Information The following information is shown:

Name

Address

Version

Phone Device/
Audio Device
: The unit name
: The Mac address of the unit
: The Bluetooth software
: The connected device names
Bluetooth operations for KW-ADV793
For Bluetooth oper ations, it is required to connect the
Bluetooth Adapter (KS-BTA200: separately purchased)
to the expansion port on the rear.
• Refer also to the instructions supplied with the
Bluetooth Adapter and the Bluetooth device.
• Refer to pages
iii and iv at the end of manual to
check the countries where may use the Bluetooth®
function.
To us e a B luetooth device through the unit (“
BT
Phone
” and “ BT Audio ”) for the first time, you need
to establish Bluetooth wireless connection between
the unit and the device.
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to 5 devices
can be registered in
total.
• Only one device can be connected at a time for each
source (“
BT Phone ” and “ BT Audio ”).
Connecting Bluetooth devices
Connecting a new Bluetooth
device
Registration (Pairing) methods
Use eit her of the following items in <Bluetooth>
menu to register and establish the connection with a
device.
• Select “
BT Phone ” or “ BT Audio ” as the source to
operate <Bluetooth> menu. (
10)
Open Make the unit ready to establish a new
Bluetooth connec t ion. The connection
is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connec t ion. The connection
is established by operating this
unit.
Continued on the next page
KW-ADV793
EN_KW-AVX838[J]6.indb 45 10.1.18 5:42:54 PM

JVC KW-AVX830 Specifications

General

Brand	JVC
Model	KW-AVX830
Category	Car Video System
Language	English