JVC KW-M180BT User Manual

5
English |
Tuner
Tuner
Tuner Basic Operation
1
Press the < > button.
2
Touch [Tuner].
Ñ Source control screen
2
1
3
1
Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
2
[FM] : Switches the FM band.
“FM1”, “FM2”, “FM3”
[AM] : Switches the AM band.
“AM1”, “AM2”
[E] [F] : Tunes in a station with good
reception automatically.
Touch and hold to switch to the next
frequency manually.
[
] : Displays the Tuner Setup screen. (P.5)
3
Recalls the memorized station.
When touched for 2 seconds, stores the current
receiving station in memory.
Presetting stations
Ñ Auto memory
You can preset 6 stations for the current band (FM1/
FM2/FM3/AM1/AM2).
1
Touch [FM] or [AM] to select the band.
2
Touch [ ].
3 Touch [Auto Store].
The local stations with the strongest signals are
found and stored automatically.
Ñ Manual memory
You can store the current receiving station in
memory.
1 Tune in to a station you want to preset.
2
Touch and hold [#] (#:1-6) in which you want to
store the station.
Ñ Recalling the preset station
1 Touch [#] (#:1-6).
Tuner Setup
1
Touch [ ].
2
Set each item as follows.
[Auto Store]
Automatically searches and stores the 6 stations with
the strongest signals for the selected band.
“Auto Store” appears.
[Area]
“N.America”(Default): AM/FM intervals:10 kHz/200
kHz.
“S.America”: AM/FM intervals: 10 kHz/50 kHz.
“Europe”: AM/FM intervals: 9 kHz/50 kHz.
[Local Seek] *
2
Tunes in only to the stations with sucient signal
strength. (LOC indicator lights up.) “ON”, “OFF”
(Default)
[RBDS] *
1
*
3
/[RDS] *
2
*
3
Displays the RBDS/RDS Settings screen.
[AF] *
2
When station reception is poor, automatically
switches to the station that is broadcasting the
same program over the same Radio Data System
network. “ON” (Default), “OFF”
[TA]
Switches to the trac information automatically
when the trac bulletin starts. (TI indicator lights
up.) “ON”, “OFF” (Default)
[RBDS Clock Sync] *
1
/[RDS Clock Sync] *
2
Synchronizing the Radio Broadcast Data System/
Radio Data System station time data and this unit’s
clock.
“ON” (Default), “OFF”
[PTY]
Select a program type.
[PTY Seek]
Searches for a program by program type.
*1 To use the function, it is necessary to set [Area] to
[N.America]/[S.America].
*2 To use the function, it is necessary to set [Area] to
[Europe].
*3 FM only
3 Touch [6].

JVC KW-M180BT Specifications

General

Brand	JVC
Model	KW-M180BT
Category	Monitor
Language	English