EasyManuals Logo
Home>JVC>Car Receiver>KW-R920BT

JVC KW-R920BT User Manual

JVC KW-R920BT
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
26
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Symptom
Remedy
Bluetooth®
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
Reduce the distance between the unit and the Bluetooth
audio player.
Turn off, then turn on the unit and try to connect again.
Other Bluetooth devices might be trying to connect to
the unit.
The connected Bluetooth
audio player cannot be
controlled.
Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Disconnect and connect the Bluetooth player again.
“PAIRING FULL” The number of registered devices has reached its limit.
Retry after deleting an unnecessary device.
( 16,
DELETE PAIR)
“PLEASE WAIT” The unit is preparing to use the Bluetooth function. If the
message does not disappear, turn off and turn on the
unit, then connect the device again.
“NOT SUPPORT” The connected phone does not support Voice Recognition
feature.
“ERROR” Try the operation again. If “ERROR” appears again, check
if the device supports the function you have tried.
“H/W ERROR” Reset the unit and try the operation again. If “H/W
ERROR” appears again, consult your nearest service
center.
If you still have troubles, reset the unit. ( 3)
SPECIFICATIONS
Digital radio
(for
KW-DB92BT
)
DAB Frequency Range L Band 1452.960MHz — 1490.624MHz
Band III 174.928MHz — 239.200MHz
Sensitivity –100dBm
Signal-to-Noise Ratio 80dB
Antenna Connector Type SMB
Antenna Output Voltage 14.4V (11V – 16V)
Antenna Maximum Current <100mA
Analog radio
FM
Frequency Range 87.5MHz — 108.0MHz (50kHz step)
Usable Sensitivity (S/N=26dB) 0.71μV/75Ω
Quieting Sensitivity
(DINS/N=46dB)
2.0μV/75Ω
Frequency Response (±3dB) 30Hz — 15kHz
Signal-to-Noise Ratio (MONO) 64dB
Stereo Separation (1kHz) 40dB
MW
Frequency Range 531kHz — 1611kHz (9kHz step)
Usable Sensitivity (S/N=20dB) 28.2μV
LW
Frequency Range 153kHz — 279kHz (9kHz step)
Usable Sensitivity (S/N=20dB) 50μV
CD player
Laser Diode GaAIAs
Digital Filter (D/A) 8 times over sampling
Spindle Speed 500 rpm — 200 rpm (CLV)
Wow & Flutter Below measurable limit
Frequency Response (±1dB) 20 Hz — 20 kHz
Total Harmonic Distortion (1 kHz) 0.01 %
TROUBLESHOOTING
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 26JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 26 3/11/2015 9:00:07 AM3/11/2015 9:00:07 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KW-R920BT and is the answer not in the manual?

JVC KW-R920BT Specifications

General IconGeneral
MP3 playbackYes
Audio formats supportedFLAC, MP3, WAV, WMA
Display typeLCD
Illumination colorMulti
Display number of lines1 lines
DIN size-
Output power200 W
Product colorBlack
Frequency range20 - 20000 Hz
Disc types supportedCD, CD-R, CD-RW
Equalizer bands quantity13
Signal-to-Noise Ratio (SNR)105 dB
Mobile operating systems supportedAndroid, iOS
USB version2.0
Bluetooth version3.0+HS
Bluetooth profilesA2DP, AVRCP, HFP, PBAP, SPP
Line outputs (RCA)3
USB ports quantity1
Apple docking compatibilityiPhone, iPod
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM, SW
Preset stations quantity36
Package weight1700 g
Operating temperature (T-T)-10 - 60 °C
Weight and Dimensions IconWeight and Dimensions
Weight1300 g
Dimensions (WxDxH)178 x 100 x 158 mm

Related product manuals