JVC KW-V230BT User Manual

ENGLISH 27
APPs APPs
❏ Switching to the Apps screen while
listening to another source (when using
iPod/iPhone)
• Select [iPhone] for <Navigation Input>
beforehand. (Page 72)
KW-V430BT/ KW-V630BT
KW-V330BT KW-V230BT
Mirroring the smartphone screen
(Only for KW-V630BT )
You can use an App of the connected iPod touch*/
iPhone*/Android on this unit.
• For Apps you can use on this unit, visit
<http://www.jvc.net/cs/car/>.
• For Android devices, you can use more functions
with the JVC Smartphone Control application. For
details, visit
<http://www.jvc.net/cs/car/>.
* Some iPod touch/iPhone 30-pin connector models cannot be used
when shipped from the factory. You can use them after updating
the software version of this unit.
❏ Preparation
1 Connect the iPod touch/iPhone/Android.
• For wired connection, see page81 for iPod
touch/iPhone or page82 for Android.
– To view video, connect the device to the
HDMI/MHL input terminal using KS-U60
(optional accessory).
• For Bluetooth connection, see page 52.
2 Select the iPod touch/iPhone/Android
device to use on the <APP Setup> screen.
(Page61)
❏ Playback operations
1 Start the App on your iPod touch/iPhone/
Android.
2 Select “Apps” as the source. (Page10)
The App screen is displayed.
• When a caution message is displayed, operate
by following the message.
• You can operate some functions of the App on the
touch panel.
• For some applications such as navigation
applications, the operation buttons and
information are not shown. You can perform the
operations on the touch panel, such as scrolling
the map.
– If “ ” appears on the screen, the unit cannot
accept the touch operation you have tried to do.
• You can also play back the audio/video using
iPod/iPhone/Android itself instead of the unit.
2017KW-VEntryK.indb272017KW-VEntryK.indb27 2016/12/0915:112016/12/0915:11

JVC KW-V230BT Specifications

General

Brand	JVC
Model	KW-V230BT
Category	Car Video System
Language	English