30
Multi-Camera Connection
Using SDI (1)
This is a simple setup to remotely control the PTZ cameras.
SDI output with no video drift between cameras is recommended in this multi-
camera setup.
For system in which PC is not used, control the camera with the remote
camera controller (RM-LP100).
Lag may occur depending on the network environment.
Model No. Description Quantity
KY-PZ100 HD PTZ Remote Camera 3
RM-LP100 Remote Camera Controller 1
DT-V24G2 * Multi-Format LCD Monitor 2
SR-HD2700 Blu-Ray Disc & HDD Recorder 1
HUB(PoE+) 1
Blackmagic Design
ATEM Television Studio,
Blackmagic MultiView 4
/ datavideo SE-2200
Switcher 1
Audio System 1
SDI Cable 6
LAN Cable (Category 5e) 4
Audio Cable (Stereo) 2
* Selectable
To Next Page
Loading...
Need help?
General
