English - 14 -
If the writing speed of the connected USB disk is not
feature may not be available.
It is recommended to use USB hard disk drives for
recording HD programmes.
Do not pull out the USB/HDD during a recording. This
may harm the connected USB/HDD.
must be formatted as the primary partition to be used
Some stream packets may not be recorded because
of signal problems, as a result sometimes videos may
freeze during playback.
is an ongoing recording or playback.
Timeshift Recording
Press Pause button while watching a broadcast to
activate timeshifting mode. In timeshifting mode, the
programme is paused and simultaneously recorded to
the connected USB disk.
Press Play button again to resume the paused
programme from where you stopped. Press the Stop
button to stop timeshift recording and return to the
live broadcast.
Timeshift cannot be used while in radio mode.
You cannot use the timeshift fast reverse feature before
advancing the playback with the fast forward option.
Instant Recording
Press Record button to start recording an event
instantly while watching a programme. You can press
Record button on the remote control again to record
from within the EPG. Press Stop button to cancel
instant recording.
You can not switch broadcasts or view the Media
Browser
programme or during the timeshifting, a warning message
appears on the screen if your USB device speed is not
Watching Recorded Programmes
Select the Recordings from the Media Browser
OK button to view the Play
Options. Select an option then press OK button.
Press the Stop button to stop a playback and return
to the Recordings.
Slow Forward
If you press Pause button while watching recorded
programmes, the slow forward feature will be available.
You can use Rapid advance button to slow forward.
Pressing Rapid advance button consecutively will
change slow forwarding speed.
Note: Viewing main menu and menu items will not be available
recording timer/s will not function while using the Recordings
menu.
Select the Recording Settings item in the Media
Browser>Settings
settings.
Format Disk: You can use the Format Disk feature
required to use the Format Disk feature.
Note: 0000 or 1234. If you have
selection) during the First Time Installation
IMPORTANT: Formatting your USB drive will erase
after a format but you will lose ALL your data.
If “USB disk writing speed too slow to record”
message is displayed on the screen while starting a
recording, try restarting the recording. If you still get
the same error, it is possible that your USB disk does
not meet the speed requirements. Try connecting
another USB disk.
Media Browser Menu
USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the Menu button while in the Media
Browser mode will access the Picture, Sound and
Settings menu options. Pressing the Menu button
You can set your Media
Browser preferences by using the Settings Menu.
Loop/Shue Mode Operation
Start playback with the Play
button and activate
continuously played in original
order
Start playback with the OK
button and activate
Start playback with the Play
button and activate
played once in random order
Start playback with the Play
button and activate
,
continuously played in the
same random order.
To Next Page
Loading...
Need help?
General
