45
Other Settings
The Other Settings menu has more advanced setting that you can adjust, these are not everyday setting.
1. Press the MENU button and then press the
buttons to select the
SETTINGS and then press the OK button. The SETTINGS menu will be
displayed.
2. Press the
buttons to select MORE and then press the OK button.
Menu Timeout You can select a time that your TV menus will be displayed. If you select OFF the menu will
remain on the screen until you press a button to remove it.
OFF - 15 Sec - 30 Sec - 60 Sec.
Standby Led You can switch the standby LED off using this setting.
Device Identication You can switch Device Identification on or off.
Software upgrade • Select SOFTWARE UPGRADE then press OK. The Upgrade Options menu will appear.
• Press the
to enable or disable AUTOMATIC SCANNING.
• To manually scan for an upgrade select SCAN FOR UPGRADE then press OK.
Auto TV OFF Select a time that you would like your TV to switch off if no buttons are pressed for a certain
amount of time.
OFF - 1 HOUR - 2 HOURS - 3 HOURS - 4 HOURS - 5 HOURS - 6 HOURS - 7 HOURS - 8 HOURS
Store Mode
Press the
to select enable or disable store mode. Store mode will brighten the display.
Audio Video Sharing
Press the
to select enable or disable audio video sharing.
Power Up Mode
Press the
to select STANDBY or LAST STATE. If you choose LAST STATE, and switch your
TV off and back on again at the mains it will switch on at its last state. Its best to leave it as
STANDBY, otherwise your TV may switch on after a power cut.
Virtual Remote
Press the
to select enable or disable virtual remote.
CEC
Press the
to select enable or disable virtual remote.
CEC Auto Power On
Press the
to select enable or disable virtual remote.
Speaker
Press the
to select TV or Amplifier. CEC has to be set to Enable to access this setting.
OSS Press OK to view the licencing information of your TV.
JVC 43' LED Smart HD TV LT-43C770(B) Manual.indd 45 12/10/2018 15:00
To Next Page
Loading...
Need help?
General
