(No.PA063<Rev.001>)1-5
WARNING:
LASER RADIATION AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
CAUTION:
• Do not look into the lens while in use.
• Light source specifications
• 95 W Laser diodes x 1
• Wavelength 449 - 461 nm
• Maximum output is 64 mW
• Beam divergence angle from lens of this unit
Wide: a = 30.3
Tele: a = 19.9
1.2.2 FOR THE CUSTOMERS IN OTHER COUNTRIES
CLASS 1 LASER PRODUCT
LASER CAUTION LABEL
WARNING
Do not look into the lens
while in use.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
1.3 ADDITIONAL CAUTIONARY ITEMS
• Make sure your working environment is dry and clean, and
meets all government safety requirements.
• Ensure that other persons are safe while you are servicing the
product.
• DO NOT perform any action that may cause a hazard to the
customer or make the product unsafe.
• Use proper safety devices to ensure your personal safety.
• Always use approved tools and test equipment for servicing.
• Never assume the product’s power is disconnected from the
mains power supply. Check that it is disconnected before
opening the product’s cabinet.
• Modules containing electrical components are sensitive to
electrostatic discharge (ESD). Follow ESD safety procedures
while handling these parts.
• Some products contain more than one battery. Do not disas-
semble any battery, or expose it to high temperatures such as
throwing into fire or it may explode.
• Refer to government requirements for battery recycling or dis-
posal.
• Do not look straight into the projector lens during operation. It
may harm your sight.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERV ICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
This service manual does not describe DISASSEMBLY.
SECTION 4
ADJUSTMENT
This service manual does not describe ADJUSTMENT.
a
Laser emission port
Location information of the label
LASER CAUTION LABEL
IEC62471-5
Location information of the icon
RG2 IEC 62471-5:2015
To Next Page
Loading...
Need help?
General
Weight and Dimensions
