9
Preparation
NOTE
• You can output the audio signal from the
[DIGITAL OUT] terminal when “DVD”, “USB” or
“DGTL IN” is selected as the source in the dis-
play window.
• When “DGTL IN” is selected as the source in the
display window, digital audio from the [DIGITAL
OUT] terminal is decoded to a linear PCM sig-
nal.
• Connect the power cable after you complete the
other connections.
• The [STANDBY
F
] lamp on the main unit lights
up.
Connecting external digital
audio devices
Output MD player or
satellite receiver
To an optical digital
output terminal
Optical digital cable
(not supplied)
Main unit
(rear view)
Input Output
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input
AV amplifier with
a built-in decoder
Connecting external analog
audio devices
Connecting the power cable
Output
Main unit
(rear view)
Input
Analog audio
device
Audio cable
(not supplied)
AC outlet
Main unit
(rear view)
Preparation (continued) Do not connect the power cable until all other connections have been made.
NX-F3_NX-F7[A]EN.book Page 9 Tuesday, April 22, 2008 1:55 PM
To Next Page
Loading...
Need help?
General
