44
Ripping sound directly from a CD to a USB device
1 Connect the USB device.
• Refer to page 20.
2 Press [USB 3].
3 Press 7 to stop playback.
TV screen
4 Press 5, /, 2 or 3 (cursor)
repeatedly to select the desired
track/group.
5 Press [TITLE/DELETE] repeatedly
to select “T. DELETE” or
“G. DELETE” in the display win-
dow.
Display window
• Select “T. DELETE” to delete a track.
• Select “G. DELETE” to delete a group.
6 Press [ENTER].
TV screen
• To cancel deleting the track/group, press
[CANCEL].
7 Press [ENTER].
NOTE
• When “WAIT” is displayed in the display window,
you cannot start deletion. Wait until the main unit
reads signals from the USB device.
• You can also refer to messages on the TV
screen when you delete a title to a track/group
from the connected USB device. The messages
indicate the operational status and provide
instructions.
• Do not press [AUDIO F] while the main unit is
deleting a track or group. If [AUDIO F] is
pressed, the main unit automatically turns off
after the track or group is deleted.
• It may take a long time to delete a group contain-
ing many tracks.
CAUTION
• Do not bump or move the main unit while delet-
ing a track/group. Such movement may interfere
with deleting.
• Do not disconnect the USB device during delet-
ing, as this may cause malfunction.
Deleting a track/group from a
USB device
For the locations of the remote
control buttons, refer to page 42.
NX-F3_NX-F7[A]EN.book Page 44 Tuesday, April 22, 2008 1:55 PM
To Next Page
Loading...
Need help?
General
