12
English
4. Press SET.
“MANUAL 1” appears on the display.
5. Press 4 or ¢ on the MULTI CONTROL to select the MANUAL
number for the memory.
6. Press SET again.
“MEMORY” appears for 2 seconds.
The setting that has been created is stored in the memory.
The adjustment you have made will apply to the sound you hear.
If you store new settings to a memory number that has already been used, the new settings replace the
existing setting.
When Rear Speakers are Connected
(CA-V908T)
If the optional rear speakers are connected, you can use the rear speakers to enjoy Surround effects when
a Surround effect (D. CLUB, HALL, STADIUM, or a MANUAL setting based on one of these) Sound
Mode is selected.
The rear speakers cannot be used when an S.E.A. effect (ROCK, POP or CLASSIC) is selected.
Adjusting the Rear Speaker Level—————————————
You can use the steps below to adjust the rear speaker level.
1. Select a Surround effect Sound Mode.
2. Start playback from the desired source.
3. Press and hold SHIFT B on the remote control.
4. Press REAR LEVEL + (8) or – (7) on the remote control to adjust the
rear speaker level.
Each time you press the button, the level changes by one step.
• You can set the level between –10 and +10 in 21 steps.
• The rear speaker level changes equally for both left and right. You cannot adjust the left and right
balance for the rear speakers independently.
• You can adjust the rear speaker level for each of the Surround effect modes.
5. Release SHIFT B.
TV
Front
Speaker
Rear
Speaker
Rear
Speaker
Front
Speaker
REAR
LEVEL
–+
SHIFT B
EN01-13.CA-V908T[U]/f 98.7.22, 8:03 PM12
To Next Page
Loading...
Need help?
General
