JVC TD-V661 User Manual

TIMER RECORDING/PLAYBACK
• Recording or playing back at any desired time can be per
formed using an audio timer.
• Read ttie instruction manual of thie timer carefully before
using it.
• Timer recording cannot be performed if the cassette's safety
tabs are removed.
In case the amplifier is not provided with AC outlets, use a multi-
plug connecter for each connection.
Stereo tuner
Amplifier
Audio timer available from an audio dealer
IHJ-I I I □□
O a □ □ i I . 1^ ® C
Procedure
Time recording
Timer piayback
1. Timer operation
Set the timer so that the power of units are switched on.
2. Amp and tuner operation
Set the source selector of the amplifier to TUNER. • Set to the playback mode.
Tune to the station to be recorded. • Adjust the volume and tone of the amplifier.
3. Deck operation
Load a cassette and perform the recording
operations. (See page 7.)
Load a recorded cassette and perform the
playback operations. (See page 6.)
4. Timer operation • Set the timer to the desired start and stop times. When you are recording, allow about 1 extra
minute at the beginning and end of the program to be sure to record everything.
• Confirm that the units connected to the timer are turned off.
5. Deok operation
Set the TIMER switch to REC.
Recording will start at the time set on the timer.
TIMER
REC OfF PLAY
Set the TIMER switch to PLAY.
Playback will start at the time set on the
timer.
■s
TIMER ^
REC OfF PLAY
Before starting timer recording, wind the tape beyond the leader section.
Turn the TIMER switch "OFF" when you finish timer operation.

JVC TD-V661 Specifications

General

Brand	JVC
Model	TD-V661
Category	Cassette Player
Language	English