(No.MB141)1-7
SECTION 3
DISASSEMBLY
3.1 Main body section
3.1.1 Removing the top cover
(See Figs.1 and 2)
(1) From the both sides of the main body, remove the four
screws A attaching the top cover. (See Fig.1)
(2) From the back side of the main body, remove the four
screws B attaching the top cover. (See Fig.2)
(3) Take out the top cover in the upward direction while ex-
tending the lower sections of the top cover in the direction
of right and left.
Fig.1
Fig.2
Top cover
AA
Top cover Rear panel
B