EN - 12
BLUETOOTH
®
OPERATION
Pairing the Soundbar with a Bluetooth
®
device to listen to music.
First time pairing
1. Press the
(SOURCE) button repeatedly on the Soundbar or press the button on the
remote control to select Bluetooth
®
mode. The display will show NO BT.
2. Activate your Bluetooth
®
device and select the search mode. “TH-E851B” will appear on
your Bluetooth
®
device list.
3. Select “TH-E851B” enter “0000” for the password if necessary. The Soundbar will voice
“Paired” and the display will show BT.
Pairing a new device
1. In Bluetooth
®
mode, press and hold the or button to clear all pairing. The Soundbar
will enter pairing mode. The Soundbar will voice “Pairing“ and the display will show PAIR.
2. Follow step 2-3 in “First time pairing“ above to pair a new Bluetooth
®
device.
Listen to Music from Bluetooth
®
device
If your Bluetooth
®
device supports A2DP, play music via your device.
If your Bluetooth
®
device supports AVRCP, use the supplied remote control to control play.
• To increase/decrease the volume, press +/- (VOLUME) button.
• To pause/resume playback, press button.
• To skip to a track, press / button.
To disconnect the Bluetooth
®
function,you can:
• Switch to another source on the Soundbar;
• Disable the function from your Bluetooth
®
device.
NOTE:
The operational range between the Soundbar and the device is approximately 8 metres.
Before connecting a Bluetooth
®
device to the Soundbar, ensure you know the device’s capabilities.
Compatibility with all Bluetooth
®
devices is not guaranteed.
Any obstacle between the device and the Soundbar can reduce operational range.
Keep this player away from other electronic devices that may cause interference.
The player will also be disconnected when your device is moved beyond the operational range.
USB OPERATION
By connecting a USB mass storage device (e.g. USB ash drive) to this unit, you can enjoy the
device’s stored music through the Soundbar.
1. Press the (SOURCE) button on the Soundbar or press the USB button on the remote
control to select USB mode.
2. Press button to pause/resume playback.
3. To skip to a track, press / button.
NOTE:
The player supports the USB music file format of MP3 only.
The Soundbar can support USB devices with up to 32 GB of memory.
The Soundbar may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
To Next Page
Loading...
Need help?
General
