– 6 –
Putting the Batteries into the Remote
Control
Insert the batteries—R6P(SUM-3)/AA(15F)—into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – marking on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
Getting Started
Unpacking
Make sure that you have all the following items.
The number in parentheses indicates the quantity of the
pieces supplied.
• FM antenna (1)
• AM (MW/LW) loop antenna (1)
• AC power cord (1)
• Remote control (1)
• Batteries (2)
If anything is missing, consult your dealer immediately.
Continued
R6P(SUM-3)/AA(15F)
1
2
3
• DO NOT use an old battery together with a new
one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery
leakage.
EN01-09UX-A52R[B]_f 01.12.4, 7:48 PM6
To Next Page
Loading...
Need help?
General
