JVC UX-C25DA User Manual

Programming tracks and files
Usingtheremotecontrol,youcanprogrammetracksfromanaudioCDorlestoplayintheorder
you desire. The following number of spaces in memory is available to you for this:
Audio-CD: 20 memory spaces Files: 99 memory spaces
Procedure with audio CD
1. The “CD” source must be in stop mode, otherwise “STOP FIRST” will show in the display.
2. Press the
PRG
button to start the programming mode.
3. The display will now show “01 PR01” where “01”willbeashing.Therstblockofnumbers
shows the current track, the second block of numbers shows the current storage space.
4. Using only the or button, select the track which you want to drop into the current storage
space.
5. Press the
PRG
buttontoconrmtheoperation.
6.Afterwardsthenextstoragespacewillbedisplayed.Repeatsteps4and5untilyourselectionis
completed or the complete number of memory spaces in occupied. In this case, “Full” will be
displayed.
7. With the button, you can start playback of the programmed tracks. During playback
the number of the track and that of the programme space will be alternately displayed.
8. Pressing the button twice deletes the programming.
Procedure with audio files
1. The “USB” source must be in stop mode, otherwise “STOP FIRST” will show in the display.
2. Press the
PRG
button to start the programming mode.
3. The display will now show “01 PR01” where “01”willbeashing.Therstblockofnumbers
shows the current track, the second block of numbers shows the current storage space.
4. Using the
Fold+
or
Fold-
button, select a folder or retain the current folder. When a folder has been
selected, the display changes to
“Fxx XXX“
. Here,
“Fxx“
stands for the current folder and
“XXX“
for the current track.
5. Using only the or button, select the track which you want to drop into the current storage
space.
6. Press the
PRG
buttontoconrmtheoperation.
7.Afterwardsthenextstoragespacewillbedisplayed.Repeatsteps4and6untilyourselection
is completed or the complete number of memory spaces in occupied. In this case, “Full” will be
displayed.
8. With the button, you can start playback of the programmed tracks.
9. Pressing the button twice deletes the programming.
• If the button is pressed during playback the process is interrupted. Turning off
the device deletes any programme which is present.
11

JVC UX-C25DA Specifications

General

Brand	JVC
Model	UX-C25DA
Category	Stereo System
Language	English