JVC UX-D150 User Manual

11
Connections
Connecting the DAB/FM Aerial
Fully extend the DAB / FM aerial. Connect the supplied DAB / FM aerial to the DAB / FM
antenna socket on the rear of the unit by turning the antenna screw cap clockwise.
Speaker Connections
1. Connect the speaker cables between the terminals as shown below.
2. Connect the speaker cables with a sliver head (black label) to the (–) terminals and
cable with a gold head (red label) to the (+) terminals.
How to Connect
• Turn the terminal cap counterclockwise to loosen it. The speaker terminal caps cannot
be fully removed from the base.
• Insert the wire into the terminal fully.
• Turn the terminal cap clockwise to securely connect it.
• Do not overtighten, this could damage the aerial.
• To avoid noise, keep aerial away from the unit, the
connecting cables and the mains cable.
AC 220-240V ~50/60Hz
Rear View of the Main Unit
AC 220-240V ~50/60Hz
Rear View of the Main Unit
Rear View of
the Speaker
Rear View of
the Speaker
Connect the speaker cable to the wrong terminal will cause the sound out of phase.

JVC UX-D150 Specifications

General

Brand	JVC
Model	UX-D150
Category	Receiver
Language	English