JVC UX-G49 User Manual

38
OPTICAL DIGITAL OUT Signals
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL
OUT terminal if the discs are not copy-protected.
Operating JVC’s TVs Using the Remote Control
You can use the remote control to operate JVC’s TVs.
While holding SHIFT, press...
DIGITAL AUDIO
OUTPUT
Output Signals
Playback disc/file STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
DVD Video
with 48 kHz, 16/20/24 bit Linear PCM 48 kHz, 16 bit Linear PCM*
with 96 kHz, Linear PCM 48 kHz, 16 bit Linear PCM
with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM
with DTS DTS bitstream 48 kHz, 16 bit Linear PCM
DVD-R/-RW in DVD-VR format
with 48 kHz, 16/20/24 bit Linear PCM 48 kHz, 16 bit Linear PCM*
with Dolby Digital Dolby Digital bitstream 48 kHz, 16 bit Linear PCM
SVCD/VCD/CD 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS DTS bitstream 44.1 kHz, 16 bit Linear PCM
MP3/WMA/WAV/MPEG-1/MPEG-2 32/44.1/48 kHz, 16 bit Linear PCM
DivX disc/file
with MP2, MP3 32/44.1/48 kHz, 16 bit Linear PCM
with Dolby Digital Dolby Digital bitstream
32/44.1/48 kHz,
16 bit Linear PCM
TV/VIDEO
TV
SHIFT
TV CH ,
TV VOL
+,–
Remote control
TV Turn on/off TV.
TV/VIDEO Change the input mode.
TV VOL
+,– Adjust the volume.
TV CH , Change the channel.
UX-G48[B].book Page 38 Friday, June 22, 2007 11:28 AM

JVC UX-G49 Specifications

General

Brand	JVC
Model	UX-G49
Category	Stereo System
Language	English