9
How to select a number
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press
10, 1,
then 5.
To select number 30, press
10, 3,
then 0.
To select number 125, press
10,
10, 1, 2, then 5.
Listening to the Radio
INFO
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength
is tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To manually stop the search, press either button.
If the FM reception is poor
Remote
ONLY
The MONO (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The
MONO (monaural) indicator disappears.
To preset the stations
Remote
ONLY
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for
FM preset stations if it is selected.
2 Activate the preset number entry mode.
• Finish the following process while the indication on
the display is flashing.
3 Select a preset number for the station you store.
• To select a number, see “How
to select a number” on the left
column.
4 Store the station.
To tune in to a preset station
Remote
ONLY
1 Select the band (FM or AM).
2 Select the preset number for the station you stored.
• To select a number, see “How
to select a number” on the left
column.
EN_UX-G950V[B]5.indb 9EN_UX-G950V[B]5.indb 9 08.4.18 5:32:04 PM08.4.18 5:32:04 PM
To Next Page
Loading...
Need help?
General
