(No.MB682<Rev.001>)1-7
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
3.1 Main body (Used figure are UX-G950VE)
3.1.1 Removing the Metal cover (See Fig.1, 2)
(1) Remove the two screws A attaching the Heat sink cover.
(See Fig.1)
(2) Remove the five screws B attaching the Metal cover. (See
Fig.1)
(3) Remove the two screws C attaching the both side of Metal
cover. (See Fig.2)
Fig.1
Fig.2
A
B
B
B
B
B
C