Kärcher BR 40/10 C Adv User Manual

- 1
Please read and comply with
these original instructions prior to
the initial operation of your appliance and
store them for later use or subsequent own-
ers.
Before using the appliance for the first time,
read and observe these operating instruc-
tions and the accompanying brochure:
Safety information for brush cleaning units
and spray-extraction units, 5.956-251.
 Danger
Immediate danger that can cause severe
injury or even death.
몇 Warning
Possible hazardous situation that could
lead to severe injury or even death.
Caution
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.
The scrubber vacuum is used for wet
cleaning or polishing of level floors.
Two brush rollers located opposite of each
other clean the floor by means of the added
detergent liquid. A working width of 400
mm and a capacity of 10 l each of the fresh
and dirt water reservoirs allow for effective
cleaning.
The power supply operation allows a high
capacity without a restriction of the working
time.
Note
The appliance can be equipped with vari-
ous accessories depending on the cleaning
task. Please request our catalogue or visit
us on the Internet at www.kaercher.com.
Use this appliance only as directed in these
operating instructions.
– This appliance is suited for the commer-
cial use, e.g. in hotels, schools, hospi-
tals, factories, shops, offices, and rental
companies.
– The appliance may only be used for the
cleaning of hard surfaces that are not
sensitive to moisture and polishing op-
erations.
The application temperature ranges
from +5°C to +40°C.
– The appliance is not suited for the
cleaning of frozen grounds (e.g. in cold
stores).
– The appliance may only be equipped
with original accessories and spare
parts.
– The appliance has been designed for
the cleaning of floors inside or or cov-
ered surfaces. With respect to other ap-
plications the usage of alternative
brushes must be checked.
– The appliance is not intended for the
cleaning of public traffic routes.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
http://www.karcher.de/de/unternehmen/
umweltschutz/REACH.htm
Contents
Safety instructions EN - 1
Function EN - 1
Proper use EN - 1
Environmental protection EN - 1
Operating elements EN - 2
Before Commissioning EN - 2
Operation EN - 2
Transport EN - 4
Storage EN - 4
Maintenance and care EN - 4
Faults EN - 4
Specifications EN - 5
Accessories EN - 6
CE declaration EN - 6
Warranty EN - 6
Spare parts EN - 6
Safety instructions
Symbols in the operating instruc-
tions
Function
Proper use
Environmental protection
The packaging materials are re-
cyclable. Please do not throw
packaging in the domestic
waste but pass it on for recy-
cling.
Old units contain valuable recy-
clable materials. Batteries, oil
and similar substances may not
be released into the environ-
ment. Therefore please dispose
of old units through suitable col-
lection systems.
9EN

Kärcher BR 40/10 C Adv Specifications

General

AC input voltage	230 V
AC input frequency	60 Hz
Maximum input power	2300 W
Maximum area performance	400 m²/h
Fresh water tank capacity	10 L
Brush rotation speed (min)	1100 RPM
Practical area performance	300 m²/h
Brush contact pressure (max)	200 g/cm²
Brush contact pressure (min)	100 g/cm²

Weight and Dimensions

Depth	470 mm
Width	520 mm
Height	380 mm
Weight	30000 g