Kärcher BR 40/10 C Adv User Manual

- 6
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and troublefree.
– At the end of the operating instructions
you will find a selected list of spare
parts that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Accessories
Order No.
Piece Machine requires piece
Brush roller, red (medium, standard) For cleaning slightly dirtied or sensitive floors. 4.762-249.0 1 2
Brush roller, green (grit) For cleaning heavily dirtied floors. 4.762-252.0 1 2
Brush roller, orange (high/ low) For scrubbing structured floors (safety tiles, etc.). 4.762-251.0 1 2
Brush roller, white (soft) For polishing floors. 4.762-250.0 1 2
Pad roller shaft For intake of roller pads. 4.762-228.0 1 2
Pad, very soft, white For cleaning and polishing sensitive floorings. 6.369-727.0 1 2
Pad, soft, yellow For polishing floors. 6.369-724.0 1 2
Pad, medium soft, red For cleaning slightly dirtied floors. 6.369-726.0 1 2
Pad, hard, green For cleaning normal to heavily dirtied floors. 6.369-725.0 1 2
Microfibre roller To remove grey tint 4.114-004.0 1 2
Vacuum bar, standard 4.777-323.0 1 2
Vacuum bar, oil-resistant 4.777-322.0 1 2
Extension cable 20 m 6.647-022.0 1 1
Attachment kit transport wheels for BR 40/10 C Classic 2.783-013.0 1 1
CE declaration
Product: Floor cleaner
Type: 1.783-xxx
Relevant EU Directives
2006/95/EC (to 28.12.2009)
2006/42/EC (from 29.12.2009)
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60335–1
EN 60335–2–67
EN 61000–3–2: 2006
EN 61000–3–3: 2008
EN 62233: 2008
Applied national standards
-
CEO
Head of Approbation
Warranty
Spare parts
14 EN

Kärcher BR 40/10 C Adv Specifications

General

AC input voltage	230 V
AC input frequency	60 Hz
Maximum input power	2300 W
Maximum area performance	400 m²/h
Fresh water tank capacity	10 L
Brush rotation speed (min)	1100 RPM
Practical area performance	300 m²/h
Brush contact pressure (max)	200 g/cm²
Brush contact pressure (min)	100 g/cm²

Weight and Dimensions

Depth	470 mm
Width	520 mm
Height	380 mm
Weight	30000 g