English 7
" STEP 1: Connect the high pressure
hose to the unit’s high pressure out-
let.
" STEP 2: Insert the spray wand of
your choice to the trigger gun. Press
in against the spring tension and
twist into locked position.
" STEP 3: Connect garden hose to
unit’s water inlet.
" STEP 4: Connect garden hose to the
cold water source and turn water on
completely. Plug the power cord into
the power outlet.
" STEP 5: Unlock the safety lock (A).
Trigger the gun (B) to eliminate trap-
ped air, wait for a steady flow of wa-
ter to emerge from the spray nozzle.
" STEP 6: Turn on the high pressure
washer (I).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
OPERATING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
