Kärcher K 3 User Manual

8 English

STEP 7:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
 STEP 8:
Turn on the high-pressure washer (I/
ON).
The motor starts only if the trigger
of the gun is pulled and shuts off
when the trigger is released.
 WARNING
To avoid serious injury never point spray
nozzle at yourself, other persons or ani-
mals.
몇 CAUTION
Always test an inconspicuous area be-
fore cleaning with high-pressure.
This nozzle features a 0º pencil jet which
rotates 360º for maximum dirt cutting ac-
tion, effectively increasing cleaning per-
formance up to 50%. This nozzle
combines the cleaning performance of a
0º pencil jet with the surface coverage of
a wide angle nozzle.
Not recommended for soft materials,
siding, painted surfaces, decks or
autos.
The Vario Power Spray Wand allows
you to adjust the cleaning pressure.
 To clean at maximum pressure, the
wand must be positioned to the high-
pressure setting (Max).
 For reduced pressure turn the wand
collar in the "Min" direction.
 To apply detergent, the wand must
be positioned to the low-pressure
setting (Mix).
USING THE ACCESSORIES
Dirtblaster
®
Vario Power Spray Wand

Kärcher K 3 Specifications

General

Form factor	Upright
Hose length	6 m
Power source	Electric
Maximum flow rate	380 l/h
Working pressure (max)	120 bar
Working pressure (min)	20 bar
Maximum input water temperature	40 °C
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	1600 W
Surface cleaner	-

Weight and Dimensions

Depth	275 mm
Width	279 mm
Height	803 mm
Weight	5800 g