Kärcher K 3 User Manual

English 9
For best results see Cleaning Tips for
specific information on how to clean
different surfaces.
Always Use Kärcher
®
Detergent for
Best Results
Kärcher
®
biodegradable detergents are
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won’t clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Kärcher
®
detergents, check
your retailer or visit our website:
www.buykarcher.com
몇 CAUTION
Never use:
– Bleach, chlorine products and other
corrosive chemicals
– Liquids containing solvents (i.e.,
paint thinners, gasoline, oils)
– Tri-sodium phosphate products
– Ammonia products
– Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Use of these items will void the war-
ranty.
 STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low-pres-
sure setting (Mix).
 STEP 2:
Fill the Detergent Tank with the se-
lected detergent.
 STEP 3:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
 STEP 4:
To rinse, move the VPS out of "Mix"
position and pull trigger to operate
unit.
 STEP 5:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
WORKING WITH
DETERGENTS

Kärcher K 3 Specifications

General

Form factor	Upright
Hose length	6 m
Power source	Electric
Maximum flow rate	380 l/h
Working pressure (max)	120 bar
Working pressure (min)	20 bar
Maximum input water temperature	40 °C
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	1600 W
Surface cleaner	-

Weight and Dimensions

Depth	275 mm
Width	279 mm
Height	803 mm
Weight	5800 g