KEB COMBIVERT F5 Installation Guideline

21
CP-Parameter
5. Parameter description
0...9999 1 - - - ud.1
-400...400 0,0125 0 Hz - ru.3
-400...400 0,0125 0 Hz - ru.1
0...255 1 0 - - ru.0
0...6553,5 0,1 0 A - ru.15
0...6553,5 0,1 0 A - ru.16
0...65535 1 0 % - ru.13
0...1000 1 0 V - ru.18
0...1000 1 0 V - ru.19
0...778 1 0 V - ru.20
0...400 0,0125 0 Hz - op.6
0...400 0,0125 0 Hz - op.10
0,00...300,00 0,01 5 s - op.28
-0,01...300,00 0,01 5 s - op.30
0,00...5,00 0,01 0 s - op.32
0,0...25,5 0,1 2 % - uf.1
0...400 0,0125 50 Hz - uf.0
0...650 V (off) 1 0 V E uf.9
0...LTK 1 LTK - E uf.11
-400...400 0,0125 5 Hz - op.21
-400...400 0,0125 50 Hz - op.22
-400...400 0,0125 70 Hz - op.23
0...9 1 7 - E pn.28
0,00...100,00 0,01 10 s - pn.30
0...200 1 140 % - pn.24
0...200 1 200:off % - pn.20
0...15 1 8 - E pn.26
0,00...300,00 0,01 2 s - pn.60
0...7 1 7 - - pn.12
0...20 1 2 - E an.31
-20,00...20,00 0,01 1 - - an.33
0...76 1 4 - E do.2
0...76 1 27 - E do.3
±30000,00 0,01 4 - - le.3
0...9 1 2 - E op.1
0...2 1 0 - E an.0
-10,0...10,0 0,1 0,2 % - an.4
CP.0 password input
CP.1 actual frequency display
CP.2 set frequency display
CP.3 inverter status display
CP.4 apparent current
CP.5 apparent current/peak value
CP.6 utilization
CP.7 intermediate circuit voltage
CP.8 interm. circuit vol./peak value
CP.9 output voltage
CP.10 minimal frequency
CP.11 maximal frequency
CP.12 acceleration time
CP.13 deceleration time (-1=CP.12)
CP.14 s-curve time
CP.15 boost
CP.16 rated frequency
CP.17 voltage stabilization
CP.18 switching frequency
CP.19 fixed frequency 1
CP.20 fixed frequency 2
CP.21 fixed frequency 3
CP.22 DC braking / mode
CP.23 DC braking / time
CP.24 max. ramp current
CP.25 max. constant current
CP.26 speed search condition
CP.27 quick stop time
CP.28 reaction of ext. overtemperat.
CP.29 analog output 1 / function
CP.30 analog output 1 / amplification
CP.31 relay output 1 / function
CP.32 relay output 2 / function
CP.33 relay output 2 / switching level
CP.34 source of rotation direction
CP.35 AN1 set value selection
CP.36 AN1 zero hysteresis
Parameter Setting range Reso- De- Unit
↵
Origin
lution fault

KEB COMBIVERT F5 Specifications

General

Brand	KEB
Model	COMBIVERT F5
Category	DC Drives
Language	English