Keithley 2002 Getting Started Manual

Software support
Several support alternatives are available for the Model 2002. Contact your local Keithley
representative for more detailed information.
Keithley software subroutines in BASIC, C, and Pascal
To help users develop software faster, Microsoft QuickBASIC, Microsoft BASIC, Microsoft
QuickC, and Borland TurboPascal subroutines are provided for several common functions: in-
strument setup, measurement acquisition, data storage, and data and graphical display. These
subroutines can be used as-is to build applications programs, or can be easily translated to meet
unique requirements, if desired.
Keithley start-up package
A start-up package, based on the BASIC language subroutines, is also included to provide ba-
sic instrument operation in a simple context. This package can be used for acquiring data or can
be modified to perform more specialized functions.
IEEE-488 interfaces supported
Capital Equipment Corporation, any version (v3.01 or later) and KPC488.2
National Instruments NI-488 for PCII or PCIIA, rev. C.11 or C.12
National Instruments NI-488.2 for PCII/IIA or AT-GPIB, rev. 1.5
IOtech Driver 488, at least v2.6
MET/CAL™ 1 routines
Routines to calibrate (adjust and/or verify) the Model 2002 on a MET/CAL system are avail-
able free.
Semi-automatic calibration program
For users with a PC who want to speed calibration, a program is available that prompts the
operator through setup and calibration of the 2002.
LabWindows® 2 drivers, LabView drivers
National Instruments has prepared drivers to operate in conjunction with this data acquisition
package.
1
MET/CAL™ is a trademark of the John Fluke Mfg. Co., Inc.
2
LabWindows® is a trademark of National Instruments.
3-2 IEEE-488 Bus Operation

Keithley 2002 Specifications

General

Brand	Keithley
Model	2002
Category	Multimeter
Language	English