Kenmore 12332 User Manual

PRESSER FEET
To change the various presser feet, raise
the presser bar to its highest position by
lifting the presser foot lever. Loosen the
presser foot thumb screw, choose the
proper foot, insert from the bottom_
Tighten the screw using the large screw
driver to make certain the foot is secure.
i/i :/ • ii_i ii _
SPEED CONTROL PLUG
Push the speed control plug onto three
prong connector.
Plug machine cord into any 110 "_ 120
volt wall outlet.
7

Kenmore 12332 Specifications

General

Brand	Kenmore
Model	12332
Category	Sewing Machine
Language	English