MENDING
SETTINGS:
Special Stitch Dia! _ _! (Model 1521)
_;: (Model 1560)
Special Stitch Variegator-Red mark on top
Stitch Width Control - 4 to 5
Stitch Length Control - Any setting except
Black Dot
Zigzag Stitch Foot
To repair a straight or three-cornered
tear, position the tear Under the needle
in such a way that the stitching catches
both sides of the tear. When mending a
three-cornered tear, stitch from each
end to th_ center, It is well to use a piece
of fabric under the tear for reinforce-
ment.
SHELL STITCHING
(Model 152! only)
SETTINGS:
Special Stitch Dial- _ .
Special Stitch Variegator-Red mark on top
Stitch Width Control - 3 to 5
Stitch Length Control - 8 to !2
Zigzag Stitch Foot "
On soft, fine fabrics, shell edging makes
an attractive finish for narrow hems or
bias.
Make a test on a sample of your
fabric to find the right thread
tension, stitch length, and stitch
width.
, Place folded hem (basted, if
necessary) or bias fold under presser
foot, with hem or fold toward the
left.
3. Stitch slowly, guiding fabric by hand
so that the zigzag stitches do not
pierce the folded edge.
To Next Page
Loading...
Need help?
General
