Setting Oven Controls
1. Arrange interior oven racks and place food in oven.
2. Press
.
3. Press
, "" will automatically appear in the display (Fig. 1).
4. Press
. The actual oven temperature will be displayed (Fig. 2).
A beep will sound once the oven temperature reaches 350° F.
Pressing
will cancel the Bake feature at any time.
1. After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press
.
2. Press
. "" will appear in the display (Fig. 3).
3. Press
. The actual oven temperature will be displayed (Fig. 2).
A beep will sound once the oven temperature reaches "425°".
Pressing
will cancel the Bake feature at any time.
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake burner symbol may not show in the display
immediately.
This appliance has been factory pre-set to start any or
function with the oven set temperature automatically set for 350°F. However if desired, the oven set temperature may be
adjusted at any time during the cooking process. You may also choose to add a or with any of
the functions listed above.
Your oven is equipped with a temperature visual display. When a cooking mode is set, the actual temperature will be shown
in the display and will rise as the unit preheat. When the unit has reached its target temperature, a chime will sound to
remind you to place the food in the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast, cakes and breads. NOTE: The lowest temperature that can be displayed is 100°F.
Setting Bake
The pad controls normal baking. If preheating is necessary, refer to the Preheat Feature for instructions. The oven can
be programmed to bake at any temperature from 170° F to 550° F (77° C to 288° C).
Fig. 3
Fig. 1
Fig. 2
To Next Page
Loading...
Need help?
General