DM-5090 (En)
20
1
Initiate the program mode.
2
3
1 Load a disc.
2 Put the MD recorder in stop mode.
Programming
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
Preparation
Select track numbers in the order you want to play them.
Start playback.
1 Select the track number to be played.
2 Set the input track number.
Repeat steps 1 and 2 till the desired tracks
have been programmed, in the desired order.
Press numeric keys in the following order.
To select track No. 12:
Press in order of 0, 2 then the CHARA. / P.MODE key.
÷ Up to 32 tracks can be selected. “FULL” is displayed when no more
track can be programmed.
÷ If you made a mistake, press the CHARACTER DELETE / CLEAR key
and enter the track No. again.
÷ An extremely shot track cannot be programmed.
÷ “– ✱✱ : ✱✱” is displayed when the total programmed period has
attained 256 minutes or more.
÷ Tracks will be played in the order they are programmed.
÷ When the 4 or ¢ key is pressed during playback, tracks will be
skipped in the direction of the pressed key.
Total remaining time of the
programmed tracks
Track No. being played
÷ The input operation is aborted if the CHARA. / P.MODE key is not
pressed while the indicator is blinking.
“PGM” lights up
Selected track
Programmed order
Programming tracks in a desired order
Each press switches the mode.
1 Track mode : PGM goes off
2 Program mode : PGM lights up
7
P.MODE
CHARA.
1
2
3
4
56
789
+100 0 +10
ABC DEF
MNOJKLGH I
PRS TUV WXY
’ , : ?
QZ
& ( ) - /
P.MODE
CHARA.
3
To Next Page
Loading...
Need help?
General
