DM-5090 (En)
34
Editing
Select “Q.MOVE”.
1 Select “Q.MOVE”.
2 Set the selection.
The modes are switched by rotating the JOG DIAL.
1 Q. MOVE? : Moving (reordering) tracks
2 Q.ERASE? : Erasing track(s)
÷ Press the EDIT/SPACE key again to abort the editing operation.
Select the track numbers to be moved.
Selected track No.
End the selection of the track numbers to be moved.
Selected track No.
Use the following procedure to change the current order of
tracks by selecting a desired order and moving the tracks
together.
Preparation
÷ Only the last selected track can be cleared by pressing the DELETE key
of the remote control unit. (To clear all of the selected tracks, cancel
editing and restart the operation from the beginning.)
÷ The orders of tracks can be confirmed by pressing the 1 key (or ¡
key) of the remote control unit.
1 Select a track number.
2 Set the selection.
To increase
track No.
To decrease
track No.
Repeat steps 1 and 2 until all tracks have
been arranged in the desired order.
20 continuous tracks within the specified range can be
reordered at a time.
1 Put the MD recorder in stop mode.
2 Press the EDIT/SPACE key to switch the
editing mode on.
Moving several tracks at a time (QUICK MOVE)
Title scrolling
Next track No.
JOG DIAL
4
¢
SET
JOG DIAL
4
¢
SET
ENTER
To Next Page
Loading...
Need help?
General
