DM-5090 (En)
38
Editing
To combine the current track with the next track.
The modes are switched by rotating the JOG DIAL.
When pressed in play mode:
1 DIVIDE? : Dividing a track
2 COMBINE? : Combining tracks
3 ERASE? : Erasing track(s)
4 MOVE? : Moving (reordering) tracks
Next track
1 Play one of the MD tracks to be com-
bined.
2 Press the EDIT/SPACE key to switch the
editing mode on.
Use the following procedure to combine two tracks into one by deleting a track number. This operation allows to connect
several tracks or a piece of music divided into several parts. After this operation, the track numbers of tracks located after the
combined tracks are decreased automatically.
1 Select “COMBINE”.
2 Set the selection.
÷ Editing is aborted if no operation has been performed for 8 seconds.
Select the track to be combined.
÷ To combine two tracks during playback, press the EDIT/SPACE key
while the first track is being played. (The track being played and the
track immediately after it will be combined.)
÷ If the operation is started during playback, it pauses automatically.
Preparation
To combine the track with the next track to it, go to step 3.
Track being played
To combine track Nos. 5 and 7 :
Combining the track being played (TRACK COMBINE)
1 Select the track number.
2 Set the selection.
To decrease
track No.
To increase
track No.
Some functions are limited due to the restrictions im-
posed by the MD standard. Before considering the symp-
toms as a sign of trouble with the unit, please read
“Symptoms related to MD standard”. p
Limitation of functionality due to MD standard
SET
JOG DIAL
4
¢
SET
JOG DIAL
4
¢
To Next Page
Loading...
Need help?
General
