Need help?Do you have a question about the Kenwood KDC-1020 and is the answer not in the manual?
M Tuner Section| frequency range (200 kHz space) | 87.9 MHz – 107.9 MHz |
|---|---|
| frequency range (50 kHz space) | 87.5 MHz – 108.0 MHz |
| usable sensitivity (S/N = 30dB) | 9.3dBf (0.8 µV/75 Ω) |
| quieting sensitivity (S/N = 50dB) | 15.2dBf (1.6 µV/75 Ω) |
| frequency response (±3 dB) | 30 Hz – 15 kHz |
| signal to noise ratio (MONO) | 70 dB |
| selectivity (±400 kHz) | ≥ 80 dB |
| stereo separation (1 kHz) | 40 dB |
AM Tuner Section| frequency range (10 kHz space) | 530 kHz – 1700 kHz |
|---|---|
| frequency range (9 kHz space) | 531 kHz – 1611 kHz |
| usable sensitivity (S/N = 20dB) | 28 dBµ (25 µV) |
CD Player Section| laser diode | GaAlAs (λ=780 nm) |
|---|---|
| digital filter (D/A) | 8 Times Over Sampling |
| D/A Converter | 1 Bit |
| spindle speed | 500 – 200 rpm (CLV) |
| frequency response (±1 dB) | 10 Hz – 20 kHz |
| total harmonic distortion (1 kHz) | 0.01 % |
| signal to noise ratio (1 kHz) | 96 dB |
| dynamic range | 93 dB |
| channel separation | 85 dB |
Audio Section| maximum output power | 50 W x 4 |
|---|---|
| full bandwidth power (at less than 1% THD) | 22 W x 4 |
| bass | 100 Hz ±10 dB |
| middle | 1 kHz ±10 dB |
| treble | 10 kHz ±10 dB |
| preout level / load (during disc play) | 1800 mV/10 kΩ |
| preout impedance | ≤ 600 Ω |
General| operating voltage | 14.4 V |
|---|---|
| current consumption | 10 A |
| installation size (W x H x D) | 182 x 53 x 157 mm |
| weight | 3.1 lbs (1.4 kg) |
To Next Page
