EasyManuals Logo

Kenwood KDC-1020 User Manual

Kenwood KDC-1020
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
— 5
About CDs
Handling CDs
Don’t touch the recording surface of the CD.
CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
Don’t stick tape etc. on the CD.
Also, don’t use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
CD accessories
Don’t use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
Removing CDs
When removing CDs from this unit pull them
out horizontally.
CDs that can’t be used
CDs that aren’t round can’t be used.
CDs with coloring on the recording surface
or that are dirty can’t be used.
Don’t use CDs without disc mark
.
•A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
CD storage
Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
Store CDs in their cases.
Burrs
Burrs
KDC-4020_U.S 01.11.29 10:28 AM Page 5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood KDC-1020 and is the answer not in the manual?

Kenwood KDC-1020 Specifications

M Tuner Section IconM Tuner Section
frequency range (200 kHz space)87.9 MHz – 107.9 MHz
frequency range (50 kHz space)87.5 MHz – 108.0 MHz
usable sensitivity (S/N = 30dB)9.3dBf (0.8 µV/75 Ω)
quieting sensitivity (S/N = 50dB)15.2dBf (1.6 µV/75 Ω)
frequency response (±3 dB)30 Hz – 15 kHz
signal to noise ratio (MONO)70 dB
selectivity (±400 kHz)≥ 80 dB
stereo separation (1 kHz)40 dB
AM Tuner Section IconAM Tuner Section
frequency range (10 kHz space)530 kHz – 1700 kHz
frequency range (9 kHz space)531 kHz – 1611 kHz
usable sensitivity (S/N = 20dB)28 dBµ (25 µV)
CD Player Section IconCD Player Section
laser diodeGaAlAs (λ=780 nm)
digital filter (D/A)8 Times Over Sampling
D/A Converter1 Bit
spindle speed500 – 200 rpm (CLV)
frequency response (±1 dB)10 Hz – 20 kHz
total harmonic distortion (1 kHz)0.01 %
signal to noise ratio (1 kHz)96 dB
dynamic range93 dB
channel separation85 dB
Audio Section IconAudio Section
maximum output power50 W x 4
full bandwidth power (at less than 1% THD)22 W x 4
bass100 Hz ±10 dB
middle1 kHz ±10 dB
treble10 kHz ±10 dB
preout level / load (during disc play)1800 mV/10 kΩ
preout impedance≤ 600 Ω
General IconGeneral
operating voltage14.4 V
current consumption10 A
installation size (W x H x D)182 x 53 x 157 mm
weight3.1 lbs (1.4 kg)

Related product manuals