Kenwood KDC-108 User Manual

Function settings
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob
to select [AUDIO CTRL] or [SETTINGS], then press to enter.
3 Turn the volume knob
to make a selection, then press to confirm.
• See table below for selection.
• Repeat step 3 until the desired item is selected/activated.
• Press ~ to return to the previous item.
4 Hold ~ to finish the procedure.
[AUDIO CTRL] :While listening to any source except in STANDBY state ...
SUB-W LEVEL -15 - + 15 (Preset: 0): Adjusts the subwoofer output level.
BASS BOOST B.BOOST LV1 *1 B.BOOST LV2: Selects your preferred bass boost level.; OFF: Cancels.
SYSTEM Q NATURAL *1 USERI ROCK! POPSI EASY I TOP401 JAZz/ GAME: Selects a preset sound mode suitable to the
music genre. (Selects [USER] to use the customized bass, middle, and treble settings.)
BASS LEVEl
MID LEVEl
TRE LEVEl
BALANCE
FADER
SUB-WSET
DETAIL SET
-8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an
adjustment, select the source you want to adjust.)
L15 - R15 (Preset: 0): Adjusts the left and right speaker output balance.
R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance.
ON *: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ; 85Hz/120HZI 160HZ: Frequencies
higher than 85 Hz/ 120 HzI 160 Hz are cut off.
SUB-W PHASE: REV (180°)/ NORM (00)*: Selects the phase angle of the subwoofer output to be in line
with the speaker output for optimum performance. (Selectable only if a setting other than
[THROUGH] is selected for [LPF SUB-W].)
SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost
in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/
WMA disc.)
VOL OFFSET: -8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level of
(Preset: 0) each source. The volume level will automatically increase or decrease when you change the
source. (Before making an adjustment, select the source you want to adjust.)
• [SUB-W LEVEU SUB-W SETI LPF SUB-WI SUB-W PHASE] is selectable only if [SWITCH'PRE] is set to [SUB-W]. (page 6)
• [SUB-W LEVEU LPF SUB-WI SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].
[SETIINGS]
AUXNAME
CLOCK
DISPLAY
10
AUX* I DVDI PORTABLEI GAMEl VIDEOI TV: Selects the desired name for the connected component.
(Selectable only if" AUX" is selected as the source.)
ClOCK ADJ: (For details, see page 6.)
DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.
TEXT SCROLL: AUTO* I ONCE: Selects to scroll the display information automatically, or scroll only once. ;
OFF: Cancels.

Kenwood KDC-108 Specifications

General

Brand	Kenwood
Model	KDC-108
Category	Car Receiver
Language	English