Kenwood KDC-108 User Manual

Troubleshooting
Sound cannot be heard.
IIPROTECTII appears and no operations
can be done.
The unit does not work at all.
• Radio reception is poor.
• Static noise while listening to the radio.
IIIN" flashes.
CD-R/CD-RW cannot be played back and
tracks cannot be skipped.
Disc sound is sometimes interrupted.
"NA FILEII appears.
"NO DISC
II
appears.
"TOC ERROR
II
appears.
"ERROR 99
11
appears.
"COpy PROII appears.
Noise is generated.
Tracks cannot play back as you have
intended them to play.
IIREADINGII keeps flashing.
Elapsed playing time is not correct.
Correct characters are not displayed (e.g.
album name).
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered with insulating
tape properly, then reset the unit. If IIPROTECT" does not disappear, consult your
nearest service center.
Reset the unit.
• Connect the antenna firmly .
•
Pull the antenna out all the way .
The CD player is not operating properly. Reinsert the disc properly. If the condition
did not improve, turn off the unit and consult your nearest service center.
Insert a finalized CD-R/CD-RW (finalize with the component which you used for
recording).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
The unit is playing an unsupported audio file.
Insert a playable disc into the loading slot.
The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try
another disc instead.
The unit is malfunctioning for some reason. Press the reset button on the unit. If
the IIERROR 99
11
code does not disappear, consult your nearest service center.
A copy-protected file is played.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Longer readout time is required. Do not use too many hierarchies and folders.
This is caused by how the tracks are recorded.
This unit can only display letters (upper case), numbers, and a limited number of
symbols.
11

Kenwood KDC-108 Specifications

General

Brand	Kenwood
Model	KDC-108
Category	Car Receiver
Language	English