You can choose between auto seek tuning of receivable
frequencies and manual tuning.
Press the SRC (source) button repeatedly to select the tuner
mode. "TUnE" is displayed when the tuner mode has been
selected.
Press the BAND button to select the band.
Each time you press the BAND button, the band switches
between FM1, FM2, FM3, and AM.
Press the AUTO button to switch between auto seek tuning
and manual tuning.
The AUTO indicator lights up only when auto seek tuning is
selected.
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
The STEREO indicator lights up when stereo broadcasts are being
received.
NOTE
4
3
2
1
Tuning
Tuner features
— 9 —
To Next Page
Loading...
Need help?
General
