Kenwood KDC-228 User Manual

English
|
17
HD Radio control features
Tuning
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD RADIO" display.
2 Select the HF band
Push the Control knob to [FM].
Each time the knob is pushed to [FM], it switches
between the HF1, HF2, and HF3 bands.
Select the HA band
Push the Control knob to [AM].
3 Tune up or down band
Push the Control knob to [4] or [¢].
• When you connect an HD Radio, Tuner features of
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
• With the HD Radio tuner, you can use the similar
functions to <Tuning Mode>, <Station Preset
Memory>, <Auto Memory Entry>, and <Preset
Tuning> of Tuner features. Refer to Tuner features for
how to use the functions.
Band display
Frequency display
Preset station number
ST indicator
SCAN
RDM
REP
OFF
VOL
Q
AUD
SET UP
MENU
CS
DISP
ATT
DIM
AUTO
AME
+
-
SCRL
SRC
AUTO/
AME
1 - 6
Control
knob
B64-2926-00English.Indd17B64-2926-00English.Indd17 04.9.304:23:46PM04.9.304:23:46PM

Kenwood KDC-228 Specifications

General

Brand	Kenwood
Model	KDC-228
Category	Car Receiver
Language	English