4
GETTING STARTED
Default:
XX
AUDIO CONTROL
SP SELECT
OFF
/
5/4
/
6 × 9/6
/
OEM
: Selects according to the speaker size
(5inches or 4inches, 6×9inches or 6inches) or OEM speakers for
optimum performance.
DISPLAY
EASY MENU
ON
:Both display and button illumination change to white color when
entering [
FUNCTION
].;
OFF
:Both display and button illumination
remain as [
COLOR
SELECT
] color. (
11
)
TUNER SETTING
PRESET TYPE
NORMAL
:Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM).;
MIX
:Memorizes one station for each preset
button, regardless of the selected band.
SYSTEM
KEY BEEP
ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
PANDORA SRC
ON
:Enables PANDORA in source selection.;
OFF
:Disables. (
8
)
IHEART SRC ON
:Enables IHEARTRADIO in source selection.;
OFF
:Disables. (
9
)
BUILT-IN AUX ON
:Enables AUX in source selection.;
OFF
:Disables. (
10
)
CD READ 1
:Automatically distinguishes between audio file disc and music CD.;
2
:Forces to play as a music CD. No sound can be heard if an audio file
disc is played.
F/W UPDATE
UPDATE SYSTEM / UPDATE HD
F/W UP xx.xx/
F/W UP Vxx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
CLOCK
CLOCK DISPLAY
ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF
:Cancels.
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCELDEMO”
“PRESS” “VOLUMEKNOB”
1 Press the volume knob.
[
YES
] is selected for the initial setup.
2 Press the volume knob again.
“DEMOOFF” appears.
Set the clock
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to select [
CLOCK
], then press the knob.
3 Turn the volume knob to select [
CLOCK ADJUST
], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Day
Hour Minute
5 Turn the volume knob to select [
CLOCK FORMAT
], then press the knob.
6 Turn the volume knob to select [
12H
] or [
24H
], then press the knob.
7 Press and hold to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [
FUNCTION
].
3 Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
.
1
2
3
To Next Page
Loading...
Need help?
General
