ENGLISH
5
HD Radio™ tuner
Search for a station or channel
1
Press to select HD RADIO.
2 Press repeatedly (or press / on RC-406) to
select FM1/ FM2/ FM3/ AM.
3 Press S/T (or press S/ on RC-406) to search for a
station or channel.
• To change the searching method for S/T: Press
repeatedly.
AUTO1 : Automatically search for a station or channel.
AUTO2 : Search for a preset station or channel.
MANUAL : Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1to6).
• To select a stored station or channel: Press one of the number buttons
(1to6) (or press one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406)
1
Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency or channel.
3 Press to search for a station or channel.
• To cancel, press
or DIRECT.
• If no operation is done for 10seconds after step
2, Direct Access
Tuning is automatically canceled.
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit
<http://www.hdradio.com>.
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming.
This service is called multicasting. While receiving HD Radio multicast
channels....
Press S/T to select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
Other settings
1
Press the volume knob to enter [
FUNCTION
].
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press
.
Default:
XX
TUNER SETTING
IF BAND
AUTO
:Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE
:Subjects to
interference noises from adjacent FM stations, but sound quality will not
be degraded and the stereo effect will remain.
AUTO
MEMORY
YES
:Automatically starts memorizing 6 stations with good reception.;
NO
:Cancels.
•
Selectable only if [
NORMAL
] is selected for [
PRESET TYPE
]. (
4
)
RECEIVE MODE
Sets the receive mode of the HD Radio receiver.
AUTO
:Automatically tunes to analog broadcast when there is no digital
broadcast.;
DIGITAL
:Tunes in to digital broadcast only.;
ANALOG
:Tunes
in to analog broadcast only.
CLOCK
TIME SYNC
ON
:Synchronizes the unit’s time to the Radio Broadcast Data System
station time.;
OFF
:Cancels.
To Next Page
Loading...
Need help?
General
