delay start cooking (program set in advance)
For Delay Start Cooking, follow the steps below.
For instance: The current time is 12 o’clock (noon) and you want to cook with 80% micro-
wave power for 5 minutes after 1 hour 30 minutes.
NOTE: You can set a maximum of 2 stages
for Delay Start Cooking. Defrost can-
not be set as one of those stages.
Ensure the oven door is closed prior
to setting the program.
1. Press the microwave button once and
the LED display will show P100. Press
the button again to change the microwave
power level to P80.
NOTE: Alternatively, after you press the
microwave button once, you can
turn the time/weight/auto menu
dial to change the power level to
P80 as well.
2. a Press the start button to confirm the
microwave power level.
b Turn the time/weight/auto menu
dial to adjust the cooking time until the
LED display shows 5:00.
ATTENTION: Do not press the start
button to confirm and start
cooking at this point.
3. a Press the clock/pre-set button to
preset the starting time for the cooking.
The hour figure will flash first.
b Turn the time/weight/auto menu
dial to adjust the starting time until the
LED display shows 13:00.
4. a Press the clock/pre-set button to
preset the starting time for the cooking.
The minute figure will flash first.
b Turn the time/weight/auto menu
dial to adjust the starting time until the
LED display shows 13:30.
5. Press the start button to complete the
setting. The microwave oven will sound
when the count down reaches the starting
time and cooking will start automatically.
1
2a , 5
2b , 3b
, 4b
3a , 4a
2b , 3b
, 4b
To Next Page
Loading...
Need help?
General
