Kenwood KR-V7050 User Manual

(weno) Cm} Lowe] (xe) Cw)
BYPASS pR LOGIC isthe DSP =) CJ
VIDEO2 VIDEQ1 TAPE2 ‘TAPE1 =
BYPASS key
DOLBY PRO LOGIC key
TEST TONE key
H@ Operation of Dolby PRO LOGIC
playback
This function allows to enjoy a similar Dolby Surround
effect to movie theaters from video software pro-
grams carrying the DO [easy susnoun) mark.
DOLBY 3 STEREO
key
CENTER
MODE key
Before using the Dolby PRO LOGIC mode, be sure
to perform the “Dolby PRO LOGIC field adjust-
DELAY TINE keys} REAR LEVEL keys
ment” procedure. CENTER LEVEL keys
1 Set the Dolby PRO LOGIC mode. Lights up.
PHO LOGIC
Remote control unit
2 Select the center mode.
(SURROUND)
Remote control unit only
; ; NORMAL — WIDE BAND — PHANTOM
Every time the key is
@ Select the mode which has been set in step 2 of the pressed, the center
"Dolby PRO LOGIC field adjustment” procedure. (Re- mode is switched.
fer to page 26.)
Play a software program encoded with Dolby Surround.
Adjust the volume and tone.
VOLUME CONTROL
14 1S 36
2 13 ? ry
@ When the level balance of center and rear speakers is
not good, perform the “Dolby PRO LOGIC field ad-
justment” procedure again. Adjust the overall volume. — Main unit Petnere ceotel ane
To return to normal stereo playback.
Goes off
BYPASS
Remote control unit
KR-V7050 (En) 22

Kenwood KR-V7050 Specifications

General

Brand	Kenwood
Model	KR-V7050
Category	Receiver
Language	English