1. How to enter the test mode
• Reset the unit while holding the "FM" key and preset "6" key.
• All indication segments go ON at the beginning of the test mode.
2. How to release the test mode
• Simply reset the unit.
• (NOTE) The test mode is not canceled by ACC OFF, power OFF, momentary power
down or the panel off.
3. Audio adjustment
• Set the volume level to -10dB (which is shown as "30" on the display).
• Loudness OFF.
• The BASS/TREBLE and BALANCE/FADER can be set to the full-boost/full-cut and full-
front/full-rear each by pressing the "Track UP" / "Track DOWN" keys.
• Sound coordination doesn't appear for the feed.
To Next Page
Loading...
Need help?
General
