Kenwood TH-77A User Manual

4-2-2. Frequency Selection
Rotate the Tuning control to select the MAIN band
frequency.Press the UP /DWN key to select the SUB band
frequency.
@ Direct keyboard frequency entry
1. Press the ENT key to select the ENTER mode.
2. Within 10 seconds of pressing the ENT key enter the
frequency from most significant digit to the least significant
digit.
The transceiver changes frequency after 1 kHz digits
have been entered (1 kHz digit is not displayed).
If 1kHz digit indicator flashes, enter the 1 kHz digit
frequency.
Before
nce entering 1kHz
OT 4 Id ERs) digit 5 indicator
B AP may flash.
If you make an error before entering all digits, press the
ENT key twice , then reenter all .
In 12.5 kHz ,or 25 kHz step size direct frequency se-
lection will be completed in the 10 kHz digit. When
you enter the following keys for the 10 kHz digit, 1
kHz and 100 Hz digit frequencies are automatically
selected from the list below.
OkHz
digit,
|
PRUENY
|
ro
KHz
aigit.
|
Frequency
0
00
5
50
i
12.5
6
62.5
z
25
7
75
3
37.5
8
875
4
37.5
9
875
4-2-3. Frequency Step Selection
To select the desired tuning or scan step size use the fol-
lowing procedure:
1. Press the F key momentarily, then press the MHz/STEP
key. The current frequency step size will be dis-
played.
fuga one J
oi a Be | pia

Kenwood TH-77A Specifications

General

Brand	Kenwood
Model	TH-77A
Category	Transceiver
Language	English