770/GS/GJ-BA-defsi-0023 79
1.2.3 Safety Precautions
The AC adapter rated to class 2 can be plugged into any
wall outlet without requiring any additional safety
precautions. The pole of the output voltage is connected to
the balance housing, which can be grounded for operation.
The data interface is also electrically connected to the
balance housing (ground).
1.2.4 Connecting Electronic Peripheral Devices
Make absolutely sure to unplug the balance from AC power
before you connect or disconnect a peripheral device
(printer of PC) to or from the interface port.
1.2.5 Levelling the Balance Using the Level Indicator
At the place of installation, level the balance using the
levelling feet so that the air bubble is centred within the
circle of the level indicator.
To Next Page
Loading...
Need help?
General
