KERN 770-12 User Manual

770/GS/GJ-BA-defsi-0023 97
3.5 Data Interface
Balances of the
KERN 770, GS
and
GJ
series come standard with an interface. You
can plug a printer or a personal computer into this interface port. In addition, you can
choose to have data output from your balance to this on-line device either automatically
or by pressing a key.
The balance operating menu allows you to define the various parameters for data
output. For information on the data formats and for interfacing a computer or a different
peripheral device, see part 5 “Interface Description“.
3.5.1 Data Output Parameter
Coupling with the stability parameter
Print on request = data output only by pressed key or software command
Auto print = continuous, automatic data output
Code
Print on request regardless of stability 6 1 1
Print on request after stability, with storage of the function 6 1 2*
Print on request at stability, without storage of the function 6 1 3
Auto print regardless of stability 6 1 4
Auto print at stability 6 1 5
3.5.2 Auto Print
The automatic data output can be stopped and started by simply pressing the
PRINT
key. This function can be blocked in order to avoid operating errors or to ensure that the
data will be output continuously in the automatic mode.
Code
Auto print stoppable by
PRINT
6 2 1
Auto print not stoppable 6 2 2*
* = factory setting

KERN 770-12 Specifications

General

Brand	KERN
Model	770-12
Category	Scales
Language	English