98
770/GS/GJ-BA-defsi-0023
3.5.3 Data Output at Defined Intervals
The volume of data in the „auto print“ mode can be reduced by defining the intervals at
which data will be output automatically. This auto print interval is based on the number
of display updates.
Auto print interval Code
1 display update 6 3 1*
2 display updates 6 3 2
3.5.4 Automatic Taring after Data Output
This convenient setting allows you to check-weigh a series of samples or products
without having to unload the balance:
- the sample remains on the pan after the weight readout has been printed;
- the balance is tared automatically after the weight readout has been printed;
- you simply load the next sample or part.
Code
Data output without automatic taring 6 4 1*
Data output with automatic taring 6 4 2
* = factory setting
To Next Page
Loading...
Need help?
General
