DE-BA-defsi-0640
66
8.7 Reset to factory setting
With this function the manual changes of the menu settings are reset to factory
setting.
Switch-on balance using key and wait for „0“ display.
Press the key and keep it pressed until „UNIT“ appears on the display.
Press the key nine times, in the display appears „rst“.
Confirm selection with key. The current status „no“ is displayed.
Use the key to set the status to „YES“.
When pressing the key, a reset to factory setting is carried out, and at the same
time the status is reset to „no“.
After that return to the weighing mode.
To Next Page
Loading...
Need help?
General
