EWJ-BA-e-1917 23
7.5 Weighing with tare
Deposit empty weighing container. Wait for stability display, then press .
Zero display appears. The weight of the container is now internally saved.
Weigh the material, the net weight will be indicated.
• The balance is able to only store one taring value at a time.
•
When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value remove load form the weighing plate and
press .
• The taring process can be repeated any number of times, e.g. when
adding several components for a mixture (adding). The limit is reached
when the taring range capacity is full.
7.6 Percent determination
Percent weighing allows to display weight in percent, in relation to a reference
weight.
Put the nominal weight
Place the nominal weight (reference weight which corresponds to 100 %).
Wait for stability display, then press . 100% is displayed.
Percent weighing /commutation
Place goods to be weighed on balance.
The weight of the item to be weighed is displayed in percent, with reference to the
nominal weight.
Press , the weight of the item to be weighed is displayed in the current
weighing unit e.g. gram.
To Next Page
Loading...
Need help?
General
